D.T.S. JACK Manuel d'utilisateur télécharger pdf (Page 12)

9.2 Protection against liquids

The projector contains electric and electronic components which should under no

circumstances come into contact with oil, water or any other liquid.

The proper unit functioning would be compromised should this occur.

9.3- Movement

JACK FPR (Cod. 03.MS012.EBLFP) Unlimited Pan rotation; Tilt 270° (1,5 sec.)

JACK (Cod. 03.MS012.EB.L) Pan 540° (2,5 sec.), Tilt 270° (1,5 sec.)

DO NOT place any obstructions in the path of the projector's movement.

WARNING

Do not place any object in the

path of the projector’s

movement

Free Pan Rotation („FPR‟) No „FPR‟

(Cod. 03.MS012.EBLFP) (Cod. 03.MS012.EB.L)

Please Note: If two different JACK model (with and without FPR) are controlled at the

same time via DMX controller, be shure that channel 6 (PAN FAR) is set to value 0.

In this way, the JACK with FPR will react to DMX same as JACK with no FPR function.

9.4- Risk of fire

Each fixture produces heat and must be installed in a well-ventilated place.

The minimum recommended distance from flammable material is 1 MT.

Minimum distance from the object being illuminated is 2 MT.

9.5- Forced ventilation

You will note, on inspection, that the unit features various air inlets and cooling fans

located on both the base and head of the fixture.

These should, under no circumstances, be blocked or obstructed whilst the projector

is in operation. Doing so could cause the fixture to seriously overheat thereby

compromising its proper operation.

9.6- Ambient temperature

The projector should never be installed in places that lack a constant air flow.

The ambient temperature should NOT exceed 40°C.

540°

270°

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 47 48

Pas de commentaire

D.T.S. JACK Manuel d'utilisateur Page 12